Product code
7880
Linealuce
7880: Fluorescent module with Electronic control gear 21 W T16 Aymmetrical Optics
Attention! Code no longer in production
Technical description:
Modular lighting system featuring asymmetrical optics for wall Grazing effect, designed for the use of fluorescent tubes. Each module is made up of an extruded aluminium section with die-cast aluminium end covers fastened in place by special stainless steel screws and special silicone seals. The optical assembly is covered by a glass screen applied directly to the extruded aluminium section and houses the 99.95% super-pure aluminium reflector, the steel lamp-holders and the fluorescent tubes. The system is powered by an external electronic transformer, contained in a special thermoplastic box fixed to the extruded section. The system is designed to feature feedthrough wiring. The luminaire is also fitted with a sheet aluminium outer casing (5903) with technopolymer plugs to be ordered separately.
Installation:
Ground, wall and ceiling installation.
Colour:
Grey (15)
Mounting:
wall recessed|ceiling recessed|ground recessed
Wiring:
External electronic control gear contained in a special thermoplastic box housing a power supply plate immersed in protective insulation resin. The presence of fast-coupling terminal boards with cover plate in Class II and PG11 for a perfectly waterproof luminaire allows for the cascade connection of contiguous modules.
Notes:
The following accessories are available upon request: microperforated screen, coloured filters, outer casing and safety wires for wall and ceiling application.
Class II;850°C;IK10;IP67
CE;ENEC-03;CCC Pending
Product configuration: 7880+L041
7880: Fluorescent module with Electronic control gear 21 W T16 Aymmetrical Optics
Product characteristics:
Total lighting output [Lm]: 618
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 24
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 25.7
Voltage [V]: 230
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 33
Number of lamps for optical assembly: 1
Lamp code: L041
Socket: G5
ZVEI Code: T 16
Ballast losses [W]: 3
Nominal power [W]: 21
Colour temperature [K]: 3000
Nominal luminous [Lm]: 1900
CRI: 86
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: /
MacAdam Step: /